Aritaum Tint in Water Review

[Review] New 2017 Aritaum Tint in Water Lip Tint

Aritaum Tint in Water Lip Tint Review:

I am one of those people who can leave the house with only BB cream and some lip product and feel beautiful. As such, I really like lip tints. The reason for that is a lip tint dries on your lips and stays… the whole day or more! My lips are incredibly dry, which is another reason why I like lip tints. With a tint you can just keep adding a lip balm all through the day without having to touch up the tint (as opposed to when you use lipstick).

And if you are in for a matte lip, you can apply man lip balm and it’ll moisturize and leaves matte finish, since male lip balms don’t shine! This applies especially to water based tints. So, of course when I saw these Aritaum Tint in Water lip tints at 5$ each I had to check them out, right?

Claims:

Lip tint that gives a high-pigment color with a burst of moisture. Hydrates the lips. Will have a bright color with a single application. Will be well applied and with a lively color all throughout the day!

Ingredients:

No.1 Oh My Dear:

Water, Butylene Glycol, Glycerin, Polymethylsilsesquioxane, Stevioside, Pentylene Glycol, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Yellow 6 (Ci 15985), Phenoxyethanol, Red 28 (Ci 45410), Caprylyl Glycol, 1,2-hexanediol, Yellow 5 (Ci 19140), Fragrance, Ethylhexylglycerin, Propanediol, T-butyl Alcohol, Illicium Verum (Anise) Fruit Extract

No.2 Lollipop:

Water, Butylene Glycol, Glycerin, Stevioside, Pentylene Glycol, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Phenoxyethanol, Red 28 (Ci 45410), Caprylyl Glycol, 1,2-hexanediol, Fragrance, Ethylhexylglycerin, Propanediol, T-butyl Alcohol, Illicium Verum (Anise) Fruit Extract

No.3 Dress Up:

Water, Butylene Glycol, Glycerin, Polymethylsilsesquioxane, Stevioside, Pentylene Glycol, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Phenoxyethanol, Red 28 (Ci 45410), Caprylyl Glycol, 1,2-hexanediol, Ethylhexylglycerin, Fragrance, Propanediol, Yellow 5 (Ci 19140), T-butyl Alcohol, Illicium Verum (Anise) Fruit Extract

No.4 Feel So Good:

Water, Butylene Glycol, Glycerin, Titanium Dioxide(Ci 77891), Stevioside, Pentylene Glycol, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Phenoxyethanol, Oleth-10, Polysorbate 60, Aluminum Hydroxide, Caprylyl Glycol, Triethoxycaprylylsilane, 1,2-hexanediol, Fragrance, Ethylhexylglycerin, Propanediol, Yellow 6 (Ci 15985), Yellow 5 (Ci 19140), Methyl Methacrylate Crosspolymer, T-butyl Alcohol, Red 28 (Ci 45410), Red 33 (Ci 17200), Simethicone, Illicium Verum (Anise) Fruit Extract, Blue 1 (Ci 42090)

No.5 Bump Into You:

Water, Butylene Glycol, Glycerin, Stevioside, Pentylene Glycol, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Red 33 (Ci 17200), Red 28 (Ci 45410), Phenoxyethanol, Yellow 5 (Ci 19140), Caprylyl Glycol, 1,2-hexanediol, Ethylhexylglycerin, Fragrance, Propanediol, T-butyl Alcohol, Illicium Verum (Anise) Fruit Extract

No.6 Born To Be Hot:

Water, Butylene Glycol, Glycerin, Polymethylsilsesquioxane, Pentylene Glycol, Stevioside, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Phenoxyethanol, Red 28 (Ci 45410), Caprylyl Glycol, Yellow 6 (Ci 15985), Yellow 5 (Ci 19140), 1,2-hexanediol, Red 33 (Ci 17200), Fragrance, Ethylhexylglycerin, Propanediol, T-butyl Alcohol, Illicium Verum (Anise) Fruit Extract

No.7 It’s My Turn:

Water, Butylene Glycol, Glycerin, Stevioside, Pentylene Glycol, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Yellow 6 (Ci 15985), Phenoxyethanol, Yellow 5 (Ci 19140), Red 28 (Ci 45410), Red 33 (Ci 17200), Caprylyl Glycol, 1,2-hexanediol, Fragrance, Ethylhexylglycerin, Propanediol, T-butyl Alcohol, Illicium Verum (Anise) Fruit Extract, Blue 1 (Ci 42090)

No.8 Let’s Party:

Water, Butylene Glycol, Glycerin, Stevioside, Pentylene Glycol, Polyacrylate Crosspolymer-6, Ammonium Acryloyldimethyltaurate/vp Copolymer, Phenoxyethanol, Red 33 (Ci 17200), Caprylyl Glycol, 1,2-hexanediol, Ethylhexylglycerin, Fragrance, Propanediol, Yellow 6 (Ci 15985), T-butyl Alcohol, Blue 1 (Ci 42090), Illicium Verum (Anise) Fruit Extract

Volume: No information

How to use:

  1. Apply on dry lips. Remove the excess of tint from the applicator (I cannot stress how important this is or you won’t be able to control the tint properly and if it goes where you don’t want it to go you will get a stain there and have to cover it with makeup).
  2. Apply from the center of the lips to the outside to get a natural gradiation of color, and blend right away before it dries.
  3. If a gradiation is not desired, apply carefully all through the lips without blending, also from the inner to the outer side.
  4. Reapply for more intense colors.

My Skin Type: Oily T, dry U, blemished, sensitive, and allergic. – Lips are dry

Aritaum Tint in Water Review:

I am quite excited to try these ones as I haven’t used a tint for a long long time. So, the first thing of course is to analyze the pack.

Aritaum Tint in Water Review
It is a very simple pack, as Aritaum usually has. A bright color with basic product information on it.

I personally think it is quite cute how the tops and bottoms have different colors, it’s not an innovative design but when you decide to make something simple sometimes you have to spice it up.
Aritaum Tint in Water Review
Here you can see the applicator. Pretty average, with average everything. Which is completely fine, for $5 this is the kind of thing you should expect!
Aritaum Tint in Water Review
I swatched every color on my arm. Unfortunately I switched no3 with no5 by accident, so the order is as follows: 1, 2, 5, 4, 3, 6, 7, 8. You can see them shining a lot on this photo, that is because they are water based, not because your lips will be super moist.
Aritaum Tint in Water Review

After they dry the colors mattified completely. And I am sorry, I smudged it a little before it dried, mea culpa! But here you can see how the colors really are, their intensity etc.
Aritaum Tint in Water Review
Here I had applied the tint just once. I am wearing number 3 Dress up. I chose this one because it has the most dramatic difference between one layer and two layers, along with number 4 (but brick-like colors look hideous on me so I chose this one instead).
Aritaum Tint in Water Review

After applying it twice. You can see how bright the color is! I applied man lip balm so that my lips wouldn’t shine, because as you can see they are really dry.

Now, can dry lips wear tints? They can! But only if they are not peeling nor with skin flakes, and you must make sure to smile (so that your lips will be stretched) while it is drying. Otherwise on your skin folds and wrinkles you’ll get a concentrated amount of color, and that is not too pleasant, is it?

I have been wearing this tint for 6 colors now and have reapplied lip balm, and even shiny lip balm, and the color is exactly as intense as it was at first! So I am extremely pleased with this.

I have also eaten two meals and brushed my teeth and although some skin flakes came out (I do have dry lips…) the tint itself stayed the same and did not transfer onto anything (not to the fork, not to the toothbrush, not to the bread, not to the mug)!!!

Where to buy:

Amazon


Have you tried Aritaum Tint in Water? What are your favorite lip tints?

Do share your thoughts in comments 🙂


Follow Cosmeperks on Instagram | Facebook | Twitter


Disclosure: This post contains affiliate links. Purchasing using those links may generate a small commission, which will be used for the maintenance of this site. Click here for full details.

Related

2 thoughts on “[Review] New 2017 Aritaum Tint in Water Lip Tint

  1. May I ask about your technique in terms of applying lip tints? I’m surprised to see how even & matte these look on your lips, watery tints tend to stain my lips patchily and leave a slightly glossy. Also, is no7 a brick red? If not, can you recommend me a tint in that color? Most tints I’ve come across don’t have enough of either red or brick in them. I’m eyeing the Aritaum color live tint in #6, but they transfer too easily which I’m never looking for in a tint. Sorry for the rant btw!

    • No no homey rant away! This is good information you gave me because now I won’t look for that tint! If I want transfers I’ll just use normal lipstick which has other advantages

      So~ hi! Answering the easy question firts, it’s not a brick red, it’s more of a bright red! I think the Etude House darling tints have a brick red option, and you shouls also check the tonymoly get it tints because they have some variety of reds there! I can’t be sure because I always go for pinker reds but those would be my two bets.

      The difficult answer is how I apply it! First I moisturize my lips and when it’s all soft I exfoliate whatever dead skin I have. But never too harshly because if I actually pull off the skin then there’s a small bruise and tints love bruises. If there’s a bruise I give up on the tint for the day. After moisturizing and exfoliating I make sure there is no residue of either products. Then I apply the tint while smiling and stay smiling without moving until it dries, so my lips will be stretched. I then apply it again in the same way, smiling so, that’s a total of two layers. The only reason why it stays so matte is because this tint loses shine after it absorbs and my lips are reeeeally dry (same reason why I have to exfoliate and smile to prevent tinted spots).
      If a tinted spot still appears then during the day instead of using a colorless lip balm I use a slightly pink one (doesn’t change the color of the tint but disguises the stain).
      I hope it helps! If you have a tint at hand try this and let me know if it works.

      Also if neither of those brands have the color you like comment again and I’ll try to think of some more brands ^^

Leave a Comment

 

CLOSE
CLOSE
%d bloggers like this: